Custom Wood Shutters
Shutters are available to the consumer directly from our factory which affords extra savings for our customers. All shutters are made using computerized machinery for precision but are all hand ﬁnished for the high quality look and feel we all expect in a high quality wood product. Our installations are also performed only by factory trained installers, all fully experienced in working within our customer’s homes. If you’re thoughts are leaning towards custom shutters, call Cadillac.
Custom Crafted Furniture For Your Windows
Treat your windows to the classic look of custom wood shutters. Available in 1 1/2 “, 2 1/2″, and 3 1/2″ louvre sizes. These beautiful window coverings are an enhancment to any decor.
Available in painted or stained finishes, all shutters are hand crafted in our own factory under the highest quality control standards and come with our full satisfaction warranty.
Call us today and have one of our design consultants visit your home or office with all the details.
How to Measure For Shutters:
There are basically two types of installations: Inside Mount and Outside Mount.
The first thing to look for on an inside mount is that there is enough depth to the window for the shutter to operate. A good rule of thumb to follow is that on a 2 1/2″ louvre you should have 2 inches of clear depth on the inside casing of the window, and 2 1/2″ of clear depth on the inside casing of the window for a 3 1/2″ louvre. This depth will allow enough room for the louvres to turn and space for the magnetic catches to be installed.
Next measure the width of the opening. Measuring at three locations, top, middle and bottom of the opening, record the smallest (narrowest) measurement. Next, measure the inside height. Measuring at the left, centre and right areas of the opening record the shortest of these three measurements.
NOTE: If any of the width measurement vary by more than 1/2″ or any of the height measurements vary more than 1/2″, an inside installation cannot be properly done. We will make factory deductions, so your shutters will fit. You are required to provide us with the opening sizes only.
First, measure the width of the window from outside of trim to outside of trim at the top, centre and bottom and record the widest measurement. Next, measure the height of the window from outside to outside of trim at the left, centre and right of the window, recording the largest measurement.
An outside mount will normally consist of a four piece frame which will be mounted around the outside of the window trim, creating a box in which the shutters will be hung. Make sure your measurements are exact to the 1/16th of an inch in order to provide a proper fit for your shutters.
For windows with no trim, measure your opening sizes as described above and add two inches to your width and two inches to your length, in order to wall mount your shutters.